Item# 7615

Can be configured to be used as one of the following battery saving products.

Features:

• 12V signal triggers relay to connect battery power to devices
• When signal is removed the timer is activated and will disconnect devices after a preset time
• Timer ranges from 15 minutes to 4 hours

• 12V signal triggers relay to connect battery power to devices.
• After 12V signal is removed, device senses low battery voltage and automatically disconnects devices.
• Low voltage setting can be used in conjunction with Timer Disconnect. Low voltage will disconnect devices prior to preset time to preserve battery power

• Automatically combines two batteries when charging, and isolates them when discharging
• Single side sensing design only monitors the voltage of the start battery
• Ideal for auxiliary batteries that are AGM or significantly larger than the start battery

• 12V signal will connect or disconnect relay without any time delay

Specifications:

• Nominal Voltage:12V DC
• Amperage Operating Current:175mA (closed)
• 4mA (open)
• Terminal Stud Torque:140 in-lb (15.82 Nm)
• Continuous Rating: 120A
• Intermittent Rating: 210A (5 Min)
• Cable Size to Meet Ratings:1 AWG (50mm²)
• Charge Sense Connect:13.0V (3 sec)
• Charge Sense Disconnect:12.75V (10 sec)
• Disconnect Time:5 sec, 15 min, 30 min, 1 hr, 1.5 hr, 2hr, or 4hr
• Input Voltage Range:9.5-16V
• Low Voltage Disconnect:11.0V (10 sec)
• 11.5V (10 sec)
• 12.0V (10 sec)
• Maximum Cable Size:1/0 AWG (50mm²)
• Stud MaterialTinned Copper:
• Terminal Ring Diameter Clearance:1.12in (28.45 mm)
• Terminal Stud Size:3/8"-16 (M10)
• Over Voltage Lockout:16.0V (5 sec)
• Weight:1.25lb (0.57 kg)